Marble Stone Tile Adhesive

- Suitable for all sizes of ceramic floor tiles, porcelain tiles, stone tiles, granite tiles.
- Suitable for marble stone tiles.
- Suitable for large sizes wall tiles ( over 400 X 400MM): 7.5kg / sqm.


Marble stone Tile adhesive is cement based acrylic modified powder bonding materials specially designed for bonding tiles to wall and floor strongly.


  • Marble stone Tile adhesive has stronger bonding strength than normal cement.
  • Marble stone Tile adhesive has easier application: No need to moisture the ceramic tiles and substrate deeply. Only need 1/3 application time of porland cement.
  • Marble stone Tile adhesive has better anti-aging and anti-leakage and anti-mildew performance.
  • Marble stone Tile adhesive costs lower labor cost and material cost. Its thin bonding layer will lower the gravity of the substrate and avoid falling down of the tiles.
  • Marble stone Tile adhesive has better flexibility to withstand the extension and contraction of the substrate and tiles under the change the temperature so as to avoid hollowing.

Where to use:

Marble stone tile adhesive suitable for interior and exterior wall and floor tiles application, such as stone tiles, granite tiles, ceramic tiles and porcelain tiles and so on.


Mixing the marble stone tile adhesive with water proportionately basing on instruction, then stir them evenly till no obvious powder paster and become uniform slurry.


1. Surface Treatment: Clean the substrate and the back side of the tiles carefully, make sure the surface smooth and clean.

2. Prepare the super strong tile adhesive and mixing the tile adhesive:Gently pour the water and ceramic tile adhesive powder material into the mixing barrel proportionately. The ratio is Powder material: water = 20:4.5-5.5.

3. Fully stirring the mixed materials until it become uniform staff without obvious sediments and particles.

4. Smearing: Smear the ceramic tile adhesive to the wall surface and the back of the tiles.

5. Tiling: Press the tiles and tap with a rubber hammer to adjust the parallelism of the tiles.


Standard package 20kg paper bag


Store the super strong type tile adhesive well in a cool and dry places, avoid moisture or rain which will influence its performance.


Best Partner:

If you have any headache about the falling down of the large size and heavy weight tiles, please kindly refer to below item for reference. Our Research and Development department has developed a hot selling bonding agent to raise the bonding strength of the tile adhesive and eliminate the easy hollowing problem between tiles and substrates.