Anti mildew Tile Grout - White Color

Introduction

Anti mildew tile grout is a cementitious grout designed for use with most types of ceramic tiles and natural stone joint filling, for both wall and floor, interior and exterior applications.

Where to Use

• Anti mildew tile grout can be used for grouting joints that are 1 - 10mm wide.
• Anti mildew tile grout is suitable for use in swimming pools and wet areas
• Anti mildew tile grout is for both internal or external, wall and floor grouting applications.

 Properties

• Superfine, stong and flexible
• Long lasting moisture resistance
• No color fading
• Excellent waterproofing

Surface Preparation and Mixing for anti-mildew tile grout

• Before commencing grouting, ensure the tile adhesive has set firmly. This usually requires 24 hours before grouting work.
• Remove any spacer lugs, rake-out any excess adhesive and any loose or foreign material from the grout joints.
• In general, ensure the grout joints are clean and dry.
• Add Anti-mildew tile Grout to a bucket of clean water mixing constantly with electric mixer until a thick creamy consistency is achieved.
• The mixing ratio is 25kg of  Anti-mildew tile grout to approximately 6.5 liters of water.
• Allow the mixture to stand for 10 minutes, remix, and then use the adhesive.

Reference Dosage:

0.1 - 1.8 kg / Square meter (Real dosage will base on real application situation)

Shelf Life for Anti-mildew tile grout:

Product can be stored for 12 months under a good storage at the temperature of 5 ℃ - 40 ℃ at a cool and dry place.